Baby Monitors

Baby Monitor not Turning on – 10 Ways to Fix

Sandra W Bullock

This website is reader-supported. When you click on links, we may earn a small commission at no additional cost to you.

If your baby monitor screen remains blank when you turn it on or do not see any change when you press the ‘ON’ button, don’t panic! It can be overwhelming to realize that your new or slightly-used monitor isn’t turning on as some of them come at price tags of over $150!

In this guide, I have gone into detail on how you can fix your baby monitor that’s not turning on. possible causes behind a baby monitor not turning on and how to fix it. We understand that your baby’s safety is of utmost importance to you and having a functional baby monitor gives you peace of mind. So let’s dive into some troubleshooting tips to get your monitor up and running again.

All baby monitors come with a power button that should be pressed for the monitor to turn on. If your monitor is not turning on, the first thing you need to check is whether it’s charged or plugged in properly.

But how are baby monitors powered?

Baby monitors are composed of two units – baby unit which is the camera and the parent unit which is the display screen. Most cameras are powered by electricity and come with electrical plugs or USB cables. Some have batteries and can be used without being plugged in, but this means you’ll need to recharge them frequently.

Most parent units can be powered by either batteries – DC power or AC power.

What Makes Baby Monitor Switch Off?

There are several reasons why a baby monitor may switch off or fail to turn on. Below are some;

Low Battery Power:

As mentioned earlier, if your baby monitor operates on battery power, low or dead batteries can cause it to turn off or fail to turn on. Some common causes include technical issues, low battery power, faulty outlets, and physical damage. Additionally, external factors such as interference from other electronic devices or poor signal strength can also affect the functioning of a baby monitor.

Power Outlet Issues:

A faulty outlet may also be the culprit. Make sure to check if the outlet is functioning properly by plugging in another device.

Technical Malfunction:

Like all electronic devices, baby monitors are prone to technical malfunctions. This can be due to a variety of reasons such as software issues, manufacturing defects, or wear and tear over time.

Physical damage:

Accidents happen, and your baby monitor may have been dropped or damaged in some way. Physical damage can cause internal components to become loose or broken, resulting in a malfunctioning device.

Offline Mode:

Some baby monitors come with an offline mode feature, which allows you to turn off the monitor when it is not in use. If your monitor has this feature, make sure it is not accidentally switched on.

Software Updates:

As technology advances, manufacturers often release software updates for their devices. These updates can improve performance and fix any bugs or glitches that may be causing your baby monitor to malfunction.

10 Ways to Fix Baby Monitor not Turning on:

Make sure the camera unit is plugged in:

If your camera unit has a power cable, make sure it’s properly connected to an electrical outlet. Most outlets are labeled with ON and OFF so make sure it’s switched on. If your monitor utilizes USB cables, ensure they are plugged into the correct port.

If the camera cable is defective, try using another cable to see if the monitor turns on. You may be able to find generic baby camera chargers on Amazon if your baby monitor brand do not sell specific replacements.

Check if the battery is charged:

If you are relying on batteries to power the parent unit, the first thing to check is if the battery has power. Some screens give you a light notification to indicate that batteries are low. I have always found replacement packs for most monitors on Amazon.

If your batteries are giving up too quickly, try replacing them or use rechargeable ones. If your monitor has a low battery indicator and it’s still not turning on, then there could be an issue with the battery port.

Check the battery terminals:

If your monitor utilizes batteries, ensure that the battery contacts are clean and not corroded. If you find any damage or corrosion, carefully clean them with a cotton swab dipped in rubbing alcohol.

Be careful not to bend the contact arms as it could prevent proper connection between the battery and monitor. Once they are cleaned, try turning on your monitor again.

Reset your baby monitor:

With constant use, electronic devices can sometimes encounter glitches. In such cases, a simple reset could help fix the issue.

To reset your baby monitor, disconnect both the camera and parent units from their power sources for at least 30 seconds. Then plug them back in and try turning on the monitor again.

Some camera units have a reset button at the back of the camera unit. To reset it, press the button for at least 5 seconds using a small pin or paper clip. This will reset the camera to its default settings and it should turn on properly.

Try using different power sources:

Sometimes, the electrical outlet may not be functioning properly or the power adapter may be faulty. To check this, try plugging in your parent unit into a different outlet and see if it turns on.

If you have multiple cameras, try using the power adapter from another camera to test if it is a problem with the adapter or not.

Check the screen brightness:

Some baby monitors have adjustable screen brightness settings. If your monitor turns on but the screen is still dark, it could be because the brightness setting is too low. Try adjusting the settings and see if that solves the issue.

Check if both units are powered:

It is important to make sure that both the camera and parent units are properly powered on. If only one unit is turned on, it may not connect to the other and cause the monitor to appear “not turning on”.

Also, check for any loose connections between the power adapter and the unit itself. A loose connection can sometimes prevent the device from turning on.

Ensure they are not offline:

If your baby monitor has internet connectivity features, make sure it is properly connected to the internet. If the connection is lost, the monitor may not turn on or function properly. Check your Wi-Fi settings and try reconnecting if needed.

Test the outlet:

If your baby monitor is not turning on, it could also be a problem with the outlet. Check if the outlet is functioning properly by plugging in another device. If that device turns on, then the outlet is fine and the issue lies within the monitor.

Replace batteries:

If your baby monitor operates on battery power, check to see if the batteries are dead or low. Replace them with fresh batteries and try turning on the monitor again.

Contact customer support:

If none of the above solutions work, it may be a technical issue with your baby monitor. In this case, it is best to contact the manufacturer’s customer support for further assistance. They will be able to guide you through any troubleshooting steps or advise if your monitor needs to be repaired or replaced. It is always helpful to have your model number and purchase information on hand when contacting customer support.

Take precautions for future use:

To avoid facing this issue again, make sure to properly maintain and store your baby monitor. Keep it away from water, extreme temperatures, and direct sunlight. Regularly clean the camera lens and check for any loose wires or connections. It is also recommended to periodically check for any software updates for your monitor. Following these precautions can help prolong the lifespan of your baby monitor and prevent future malfunctions.

Steps to Fix a Baby Monitor That’s Not Turning On

  1. Replace the Batteries: If your baby monitor is battery-powered, start by replacing the batteries. Make sure to use high-quality batteries and check the polarity before inserting them into the device.
  2. Check Power Outlet: If your baby monitor uses an external power source, such as a wall outlet, make sure to check if the outlet is functioning properly by plugging in another device. If it’s not working, try using a different outlet.
  3. Reset the Device: Sometimes, a simple reset can fix technical issues with electronic devices. To reset your baby monitor, turn it off and unplug it from the power source for a few minutes. Then, plug it back in and turn it on again.
  4. Check for Physical Damage: Inspect your baby monitor for any physical damage, such as cracks or loose components. If you find any, try to fix them or consider getting professional help if needed.
  5. Contact the Manufacturer: If none of the above steps work, it’s best to contact the manufacturer for further assistance. They may be able to provide specific troubleshooting tips or offer a replacement if your device is still under warranty.
  6. Consider Professional Repair: If your baby monitor is no longer under warranty and you’re not comfortable fixing it yourself, consider taking it to a professional repair service. They will have the expertise and tools to diagnose and fix the issue.

Prevention Tips

To prevent your baby monitor from not turning on in the future, here are some tips:

  • Use high-quality batteries for battery-powered devices and replace them regularly.
  • Keep the device away from water or moisture-prone areas.
  • Avoid dropping or mishandling the device.
  • Regularly clean and maintain the device as per the manufacturer’s instructions.
  • Store the monitor in a safe place when not in use to avoid any physical damage.

By following these tips, you can ensure that your baby monitor stays in good working condition. Remember, it’s important to regularly check and maintain your baby monitor to prevent any issues from arising.

Fixing Baby Monitor with no Signal:

If your baby monitor is turning on but there’s no signal, here are some steps you can try:

  1. Ensure the camera and receiver are synced properly.
  2. Check for any physical obstructions between the two devices, such as walls or furniture.
  3. Make sure the camera is not too far away from the receiver.
  4. Try adjusting the channel settings on both the camera and receiver.
  5. If using a Wi-Fi enabled monitor, check your internet connection and try resetting the network if necessary.
  6. Contact the manufacturer for further assistance or consider professional repair if necessary.

How to Fix Babysense Baby Monitor not turning on:

To troubleshoot the issue of the Babysense monitor not turning on despite having charged batteries, please follow these steps:

  1. First, switch between the power adapters of the camera and parent units. Allow the parent unit to charge for some time before attempting to turn it back on. If this resolves the problem, then the issue lies with the power adapter.
  2. If the problem persists, disconnect the cameras and parent unit from the power adapters.
  3. Next, try resetting the monitor by gently inserting a sharp pin into the reset hole located at the back of the parent unit (underneath the kickstand).

By following these steps, you should be able to address the problem and get the Babysense monitor working properly again. Read more on Babysense’s website here.

Infant Optics Monitor Wont Turn On

Image of Infant Optics showing the Power On and OFF button
Image of Infant Optics monitor showing the Power ON/OFF/SLEEP button(labeled as 1 at the top side of the screen).

If your Infant Optics screen won’t turn on despite pressing the power ON/OFF button at the top side of the monitor, it is most likely because of loose batteries that are not touching the terminals with the cover not secured to the slots or the batteries are depleted entirely. Check the battery compartment at the back and ensure that it is closed securely and that the batteries are touching the terminals.

If the batteries are depleted, you should charge it using its AC adapter or consider buying replacement batteries for Infant Optics monitor. Below is a large-capacity 1500 mAh battery you can get on Amazon.

The video below shows how to remove and replace the battery. The video also has details on how to troubleshoot other Infant Optics issues;

VTech Baby Monitor not turning on even when Plugged in:

VTech Baby monitors are notorious for coming with very unreliable batteries and I have often found them to not last more than 3 months. By the third month, the batteries get drained really quickly and no charge is left making it to rely entirely on AC power which necessitates it to be plugged in all the time. If the monitor is plugged in and not turning on, chances are that the power adapter isn’t functioning properly. Try connecting the monitor to a different power source or try using a new power adapter if possible, to see if that resolves the issue

Miku Baby Monitor not Turning on:

According to Miku’s Customer support, you need to reset your Miku monitor if it’s not turning on. To perform this task, start by unplugging the cable from the back of Miku. Wait for 60 seconds before plugging the cable back into Miku. Once plugged in, wait for 30 seconds until the indicator light becomes solid.

Next, open your Miku app and tap the three horizontal lines located in the top left corner. Select “Add Miku” or “Add Device” and follow the provided steps. It’s important to note that this process will not compromise any previously recorded data, so there’s no need to remove the device.

What Monitor Turning on Tells You About How to Pick a Good Monitor – 5 lessons;

  1. Battery Life Matters: One of the most common issues with baby monitors is battery life, as discussed earlier. When purchasing a baby monitor, be sure to check the battery life and make sure it’s reliable. You can also opt for battery-operated baby monitors in this list.
  2. Check for Compatibility: Before purchasing a baby monitor, ensure that it works with your home network and devices. If you have an older router or phone, it may not be compatible with newer baby monitors.
  3. How it is powered: Baby monitors can be powered in multiple ways – battery, plug-in, and rechargeable batteries. Depending on your needs and preferences, make sure to select the right type of power supply for your monitor. Read about DC-powered monitors to ensure you don’t buy brands that will cost you to replace them every other 3 months or so.
  4. Cost of battery replacement: If you opt for a battery-powered baby monitor, make sure to check the cost of replacement batteries. Some brands may require expensive and frequent battery replacements, which can add up over time. Read more about battery replacement for baby monitors here.
  5. Warranty: It’s always important to check the warranty and return policy of any electronic device before purchasing. This can save you from headaches if something goes wrong with your baby monitor. If your brand doesn’t turn on at all, you should be able to return it. I recommend going for brands that offer at least 1-year guarantee.

Additional Tips:

  • Keep the firmware updated: Just like any other electronic device, it’s important to keep your baby monitor’s firmware up to date. Check for updates regularly within the app or on the manufacturer’s website.
  • Troubleshooting: If your baby monitor is still not turning on, try resetting it or checking the batteries. You can also refer to the manufacturer’s troubleshooting guide for specific issues.
  • Consider a video baby monitor: While audio-only monitors are cheaper, video monitors provide a more comprehensive view of your baby and their surroundings. They may also come with additional features such as night vision and two-way audio communication.
  • Safety precautions: Always ensure that your baby monitor is placed out of reach from your child. Also, make sure to keep all cords and power sources away from their crib or play area to prevent any accidents.
  • Seek professional help: If the above tips do not work or if you are unsure about how to fix your baby monitor, it’s best to seek professional help. Contact the manufacturer or a certified technician for assistance.
  • Consider a replacement: If your baby monitor is old and has been experiencing issues frequently, it may be time to consider purchasing a new one. Technology advances quickly and newer models may offer better features and reliability. Do your research and compare options before making a decision.