Baby Monitors

How to Reset VTech Baby Monitor(Correctly)

Sandra W Bullock

This website is reader-supported. When you click on links, we may earn a small commission at no additional cost to you.

Looking to reset VTech Baby Monitor? You’re on the right page.

Whether you have the latest, most-upgraded version of VTech baby monitor brands such as VM901, RM5752, or older models such as VM5251, VM3254, VM321, this comprehensive troubleshooting guide will help you reset your baby monitor. This guide is ideal for parents, grandparents and guardians who are seeking easy-to-follow instructions on how they can reset their VTech baby monitor.

Why Reset Your VTech Baby Monitor?

Resetting your VTech baby monitor can help solve a wide range of issues that you may be experiencing with the device. Some common reasons why you may need to reset your baby monitor include:

  1. Technical Glitches: Like any electronic device, your VTech baby monitor may experience technical glitches or malfunctions from time to time. These issues can greatly affect the performance of your monitor, making it difficult for you to use.
  2. Connection Issues: Your VTech baby monitor relies on a strong and stable connection to work effectively. If the connection between the camera and the parent unit is weak or unstable, resetting the device may help improve the connection and resolve any issues.
  3. Software Updates: Updating your VTech baby monitor’s software can sometimes result in errors or issues that may require a reset to fix. This is especially true if the update was not completed successfully.
  4. Forgotten Settings: You may have accidentally changed some settings on your baby monitor and are now unable to change them back. Resetting your VTech baby monitor can help restore the default settings, making it easier for you to use.
  5. Factory Settings: If you have purchased a used VTech baby monitor or are planning to sell your current one, resetting it to factory settings ensures that all personal information and custom settings are erased.

How to reset Vtech baby monitor – Summary:

In order to reset any brand of VTech baby monitor, locate the reset button at the back of the parent unit. Using a small pin, insert it into the hole and press the button inside for 5 seconds. Release and the unit will restart, resetting it to its factory settings. If this does not resolve any issues you are experiencing, try additional troubleshooting steps such as checking all connections and making sure units are within range of each other. Refer to your user manual or seek further assistance if needed. More troubleshooting options below;

3 Types of VTech Baby Monitor Resets

Before attempting any troubleshooting steps, make sure that your VTech baby monitor is turned off and unplugged from the power source. This will help prevent any accidents or further issues during the reset process.

  1. Soft Reset: The first step to troubleshooting your VTech baby monitor is by performing a soft reset. This involves turning off the monitor, removing the batteries (if applicable), and leaving it unplugged for at least 30 seconds before turning it back on.
  2. Hard Reset: If a soft reset does not resolve the issue, you may need to perform a hard reset. This involves pressing and holding the “reset” button on your monitor for at least 10 seconds. This should be done while the device is turned on and plugged into a power source.
  3. Factory Reset: For more complex issues, you may need to perform a factory reset on your VTech baby monitor. This will erase all personal information and custom settings, returning the device to its original factory state. To do this, turn on the monitor and press and hold the “reset” button for at least 30 seconds.

Steps to Reset VTech Baby Monitor:

Soft Reset Steps:

  1. Turn off the monitor.
  2. Remove the batteries (if applicable).
  3. Unplug the device from the power source.
  4. Leave it unplugged for at least 30 seconds.
  5. Reinsert the batteries and plug the device back into a power source.
  6. Turn on the monitor and check if the issue has been resolved.

Hard Reset Steps

  1. Make sure the monitor is turned on.
  2. Locate the “reset” button (usually found on the back or bottom of the device).
  3. Press and hold the “reset” button for at least 5 seconds.
  4. Release the button and check if the issue has been resolved.

Factory Reset Steps:

  1. Turn on the monitor.
  2. Locate the “reset” button (usually found on the back or bottom of the device).
  3. Press and hold the “reset” button for at least 30 seconds.
  4. Release the button and wait for the device to restart.
  5. Check if the issue has been resolved, if not, repeat steps 1-4.

Note: If the issue still persists after performing all three reset methods, it may be a hardware problem and you should contact VTech customer support for further assistance.

Where is the Reset Button in VTech Monitor?

The location of the reset button may vary depending on the model of your VTech baby monitor. However, it is usually located on the back or bottom of the device, near the power button. Refer to your user manual for specific instructions on where to find the reset button on your particular model. Remember to always use caution when performing a factory reset as it will erase all saved settings and data on the monitor. It should only be used as a last resort when troubleshooting issues with your device.

The image below shows the location of VTech Reset button

image showing reset button on VTech Baby monitor

Read more on Vtech’s support here.

Common Issues Resolved by Resetting VTech Baby Monitor

  1. Frozen or unresponsive screen
  2. Poor audio/video quality
  3. Connection issues between parent unit and baby unit
  4. Incorrect time/date display
  5. Malfunctioning buttons or controls
  6. Inability to pair additional cameras
  7. Forgotten password for parent unit access

Tips to Avoid Common Issues with VTech Baby Monitor

  1. Regularly clean the camera lens and monitor screen to ensure clear audio and video quality.
  2. Keep the monitor away from electronic devices that may interfere with its signal.
  3. Avoid placing the monitor in direct sunlight or near sources of heat, as this may cause malfunctions.
  4. Follow the recommended charging instructions for both the parent unit and baby unit to ensure optimal battery life and functionality.
  5. Update your monitor’s software when prompted by VTech to avoid compatibility issues.
  6. Use a secure password for accessing the parent unit to prevent unauthorized access.
  7. If experiencing connection issues, try moving the parent unit closer to the baby unit or resetting both units.
  8. Regularly check and replace batteries in the parent unit as needed.

Additional Troubleshooting Steps

If a factory reset does not resolve the issue you are experiencing with your VTech baby monitor, try these additional troubleshooting steps:

  1. Ensure that all units (parent and baby) are turned on and properly charged.
  2. Check that all units are connected to the same WiFi network (if applicable).
  3. Make sure all audio and video cables are securely connected.
  4. Verify that the parent unit is within range of the baby unit – typically 1000 feet in open areas and 500 feet indoors.
  5. Try resetting your home router if you are experiencing connection issues with a WiFi enabled monitor.
  6. If you are unable to pair additional cameras, make sure they are compatible with your specific baby monitor model.
  7. If you have forgotten the password for accessing the parent unit, refer to your user manual for instructions on how to reset it.

How to Reset VTech VM901:

You can reset the parent unit of VM901 by pressing the RESET key at the back of the unit. Use a pin and insert it into the hole on the back of the parent unit, and then press the button inside. Hold for 5 seconds and release. The unit will shut off and restart, returning to its factory settings. See the manual here.

You can also check out our general VTech troubleshooting guide here.